PISTON RING INSPECTION
PISTON RING INSPECTION
SM2841707
id011000592300
1.Using the piston, press the piston ring parallel into the cylinder to 43.9 mm {1.73 in} from the upper end of the cylinder block.
bpe2ue00000175
|
2.Measure the piston ring end gap using a feeler gauge.
-
• If it exceeds the maximum specification, replace the piston ring.
bpe2ue00000095
|
-
Standard piston ring end gap
-
Top: 0.13—0.18 mm {0.0052—0.0070 in}Second: 0.18—0.28 mm {0.008—0.011 in}Oil (Rail): 0.10—0.35 mm {0.004—0.013 in}
-
Maximum piston ring end gap
-
Top: 0.35 mm {0.0136 in}Second: 0.45 mm {0.0176 in}Oil (Rail): 0.52 mm {0.0203 in}