FRONT PRE-TENSIONER SEAT BELT [TWO-STEP DEPLOYMENT CONTROL SYSTEM – US/CANADA SPEC.]
FRONT PRE-TENSIONER SEAT BELT [TWO-STEP DEPLOYMENT CONTROL SYSTEM – US/CANADA SPEC.]
SM2334174
id0810b4502100
Purpose
Function
|
Construction
|
|
Operation
Normal operation (pre-tensioner non-operation)
-
• The spool (retraction shaft) of the front pre-tensioner seat belt (1) is separated from the clutch pawl base (2).• The spool of the front pre-tensioner seat belt rotates (4) in conjunction with the with drawl/retraction of the front seat belt (3).
|
Pre-tensioner activation
1.The gas generator produces (1) gas when it receives an operation signal from the SAS control module.
2.The piston in the cylinder is pressed (3) by the generated gas pressure (2) and the gear and the clutch pawl base rotate (4).
3.The clutch pawl is pulled out and engaged (5) with the spool by the rotation of the gear and the clutch pawl base. The ring gear is engaged with the locking base and the force of the ball being pressed out is transmitted to the retraction shaft.
4.When the clutch pawl is engaged, the force of the pressed piston is transmitted to the spool and the spool rotates (6).
5.The front seat belt is retracted (7) by the rotation of the spool.
|