M POSITION SWITCH, UP SWITCH, DOWN SWITCH [EV6A-EL, EV6AX-EL]
M POSITION SWITCH, UP SWITCH, DOWN SWITCH [EV6A-EL, EV6AX-EL]
SM2565448
id0517o3363600
Purpose/Function
M position switch
• The M position switch detects that the selector lever is in the M position.
Up switch
• The up switch detects the shift up operation of the selector lever.
Down switch
• The down switch detects the shift down operation of the selector lever.
• The signal for the M position switch, up switch, and down switch is sent to the TCM via CAN and it is used for the manual shift control and the engine transaxle integrated control.
Construction
• The M position switch, up switch, and down switch are built into the selector lever component.
am3zzn00009537
|
• The M position switch, up switch, and down switch are on/off type switches.
Operation
M position switch
• When the selector lever is in the M position, the M position switch contact point closes.
• By opening and closing the M position switch contact point, the TCM detects that the selector lever is in the M position.
Up switch
• When the selector lever is in the shift up position (+), the up switch contact point closes.
• Based on the opening and closing of the up switch contact point, the TCM detects that the shift up has been operated.
Down switch
• When the selector lever is in the shift down position (-), the down switch contact point closes.
• Based on the opening and closing of the down switch contact point, the TCM detects that the shift down has been operated.
am3zzn00009962
|
