id091900002000

Outline

Function

― Continuous wiper function

― Auto-stop function

― Intermittent wiper function

― Synchronized washer function

Structure/Construction

System structure

am3zzn00008882

System wiring diagram

ac30zn00000592

Operation

Continuous wiper operation

1.When the rear wiper and washer switch is in the on position (1), the instrument cluster detects (2) a rear wiper switch on signal.

2.The instrument cluster sends (3) the rear wiper switch on signal to the body control module (BCM) via CAN communication.

3.When the body control module (BCM) receives the rear wiper switch on signal, it sends (4) a rear wiper operation request signal to the electrical supply unit (ESU) via CAN communication.

4.When the electrical supply unit (ESU) receives the rear wiper operation request signal, it turns FET A on (5).

5.When FET A turns on, the rear wiper operates (6) continuously.

ac30zn00000593

Auto-stop operation

Note

• The auto stop switch in the rear wiper motor operates as follows according to the operation position of the rear wiper.

― Rear wiper in park position: Off

― Rear wiper in position other than stop: On

Operation conditions

• Rear wiper and washer switch turns off during continuous wiper operation

Operation

1. When the rear wiper and washer switch is in the off position (1), the electrical supply unit (ESU) turns transistor A off (2).

2. The rear wiper operates (3) continuously because the autostop switch is on.

3. When the rear wiper stops at the park position, the autostop switch turns off (4).

4. When the autostop switch turns off, the rear wiper stops (5).

ac30zn00000594

Intermittent wiper operation

1.When the rear wiper and washer switch is in the INT position (1), the instrument cluster detects (2) a rear wiper switch INT signal.

2.The instrument cluster sends (3) the rear wiper switch INT signal to the body control module (BCM) via CAN communication.

3.When the body control module (BCM) receives the rear wiper switch INT signal, it sends (4) a rear wiper operation request signal to the electrical supply unit (ESU) via CAN communication.

4.When the electrical supply unit (ESU) receives the rear wiper operation request signal, it turns FET A on (5).

5.When FET A turns on, the rear wiper performs intermittent wiper operation (6).

ac30zn00000595

Synchronized washer operation

1.When the rear wiper and washer switch is in the rear washer position (1) with the ignition switched ON (engine off or on), the instrument cluster detects (2) a rear washer switch on signal.

2.The instrument cluster sends (3) the rear washer switch on signal to the body control module (BCM) via CAN communication.

3.When the body control module (BCM) receives the rear washer switch on signal, it turns FET A and FET D on (4) and operates (5) the rear washer motor.

4.When the body control module (BCM) receives the rear washer switch on signal for a certain period of time, it sends (6) a rear wiper operation request signal to the electrical supply unit (ESU) via CAN communication.

5.When the electrical supply unit (ESU) receives the rear wiper operation request signal, it operates (7) the rear wiper.

6.When the rear washer switch is in the off position, the rear wiper stops after it operated twice.

ac30zn00000596