Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SIMULATION TABLE [PCM (SKYACTIV-G (US))]

SIMULATION TABLE [PCM (SKYACTIV-G (US))]

SM2565543

id0102t43501u0

—: Not applicable

Simulation item

Unit/Condition

Operation

Operation condition

Engine condition

Other condition
A/C_REQ
No(False)/Yes(True)
• Select No/Yes to forcibly change the A/C switch status.
• Under the following conditions:
― Idle (no load)
• Not applicable
A/C_SW
Off/On
• Select Off/On to disengage/engage the magnetic clutch.
• Under the following conditions:
― Idle (no load)
• Not applicable
AIRSHUT_POS_COMD *2
% Open
• Changes % to forcibly open/close the active air shutter.
• Not applicable
• Not applicable
CHARGE_LAMP
No(False)/Yes(True)
• Select No/Yes to turn on/off the charging system warning light.
• Select No/Yes to display/not display the charging system warning indication on the multi-information display.
• Under the following conditions:
― Ignition is switched ON (engine off)
― Idle
― Racing (not idle)
• Not applicable
CSTR_VENT_SOL_DUTY *1
%
• Changes % and forcibly drives/stops CV solenoid valve.
• Under the following conditions:
― Ignition is switched ON (engine off)
― Idle
― Racing (not idle)
Caution
• Do not add fuel with the CV solenoid valve closed. Otherwise, it will result in air pollution because the evaporative gas in the fuel tank will escape directly into the atmosphere.
Note
• Override drive parameter: 0%
― CV solenoid valve: open
• Override drive parameter: 100%
― CV solenoid valve: close
EGR_COMD
%
• Displays in the M-MDS but it does not operate.
ENG_COOL_VLV_POS_COMD
°(deg)
• Changes °(deg) and forcibly drives/stops coolant control valve.
• Under the following conditions:
― Ignition is switched ON (engine off)
Note
• Override drive parameter: 0—119°
ENG_RPM_DSD
Rpm
• Changes value (RPM) to forcibly vary engine speed.
• Under the following conditions:
― Idle
― Racing (not idle)
• The use in the following ranges is recommended:
― Engine coolant temperature: 75—95 °C {167—203 °F}
― Vehicle speed: 0 km/h {0 mph}
― Override drive parameter input range: 550—2,000 rpm
FAN
%
• Displays in the M-MDS but it does not operate.
FP_DUTY
%
• Changes % and forcibly drives/stops fuel pump.
• Under the following conditions:
― Ignition is switched ON (engine off)
― Idle
― Racing (not idle)
Warning
• Do not use the simulation function while the fuel hose between the high pressure fuel pump and fuel pump is removed.
Note
• Override drive parameter: 5—95%
FUEL_PUMP_REQ
Off/On
• Select Off/On to forcibly drive/stop the fuel pump.
• Under the following conditions:
― Ignition is switched ON (engine off)
― Idle
― Racing (not idle)
• Not applicable
INJ
—
• Forcibly stops the fuel injectors while the engine is idling.
• Under the following conditions:
― Idle
Warning
• Do not use the simulation function while the vehicle is being driven. Stopping the fuel ejection causes the engine to stall which may cause the brakes to not function.
L_SPD_FAN
Off/On
• Select Off/On to forcibly drive/stop the cooling fan at low speed.
• Not applicable
• Not applicable
M_SPD_FAN
Off/On
• Select Off/On to forcibly drive/stop the cooling fan at middle speed.
• Not applicable
• Not applicable
H_SPD_FAN
Off/On
• Select Off/On to forcibly drive/stop the cooling fan at high speed.
• Not applicable
• Not applicable
MIL
Off/On
• Select Off/On to turn on/off the check engine light.
• Under the following conditions:
― Ignition is switched ON (engine off)
― Idle
― Racing (not idle)
• Not applicable
OIL_PRES_SOL
Off/On
• Select Off/On to forcibly drive/stop the engine oil solenoid valve.
• Not applicable
• Not applicable
OIL_PUMP_DUTY
% Duty Cycle
• Changes % and forcibly drives/stops engine oil solenoid valve.
• Under the following conditions:
― Idle
• Not applicable
PRG_DUTY
%
• Changes % and forcibly drives/stops purge solenoid valve.
• Under the following conditions:
― Ignition is switched ON (engine off)
― Idle
― Racing (not idle)
Warning
• Do not open the purge solenoid valve while the CV solenoid valve is forcibly closed. Otherwise, there may be abnormal vacuum in the fuel tank, resulting in damage to the fuel tank.
Note
• Override drive parameter: 0%
― Purge solenoid valve: close
• Override drive parameter: 100%
― Purge solenoid valve: open
WHEEL_DRIVE_CTRL_COMD *3
—
• Forcibly drives/stops AWD solenoid.
• Under the following conditions:
― Ignition is switched ON (engine off)
― Idle
― Racing (not idle)
Note
• If the AWD solenoid is forcibly driven, the AWD warning light flashes.
*1 :U.S.A. and CANADA
*2 :Vehicles with active air shutter
*3 :AWD