CLUTCH DISC INSPECTION [C66M-R]
CLUTCH DISC INSPECTION [C66M-R]
SM2335434
id0510ma157500
1.Inspect the lining surface for discoloration and grease adhesion.
2.Inspect the torsion spring for weakness and the rivets for looseness.
3.Using a vernier caliper, measure the depth between the lining surface and the rivet head.
amxzzw00005474
|
-
Minimum clutch disc thickness
-
0.3 mm {0.01 in}
-
• If it is less than the minimum specification, replace the clutch disc. (See CLUTCH UNIT REMOVAL/INSTALLATION [C66M-R].)
4.Measure the clutch disc runout using a dial gauge.
am3uuw00002096
|
-
Maximum clutch disc runout
-
0.7 mm {0.03 in}
-
• If it exceeds the maximum specification, replace the clutch disc. (See CLUTCH UNIT REMOVAL/INSTALLATION [C66M-R].)