INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]

id0113u0801900

Replacement Part

Intake manifold gasket

Quantity: 4

Location of use: Intake manifold

Throttle body gasket

Quantity: 1

Location of use: Throttle body

Warning

• A hot engine and intake air system can cause severe burns. Turn off the engine and wait until they are cool before removing the intake air system.

2.Remove in the order indicated in the table.

3.Install in the reverse order of removal.

am3zzw00034244

1	MAF sensor/IAT sensor No.1 (See MASS AIR FLOW (MAF) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.1 REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)
2	Air cleaner cover (See Air Cleaner Cover Installation Note.)
3	Air cleaner element
4	Resonance chamber (See Resonance Chamber Removal Note.)
5	Fresh-air duct (See Fresh-air Duct Removal Note.)
6	Air cleaner case (See Air Cleaner Case Installation Note.)
7	Ventilation hose (See Ventilation Hose Installation Note.)
8	Air hose (See Air Hose Installation Note.)
9	Throttle body
10	Vacuum hose (See VACUUM HOSE REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)
11	Evaporative hose (See Evaporative Hose Installation Note.)
12	PCV hose
13	MAP sensor/IAT sensor No.2 (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.2 REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)
14	Intake manifold (See Intake Manifold Removal Note) (See Intake Manifold Installation Note)