SYSTEM PROBLEM NOTIFICATION IS DISPLAYED [PARKING ASSIST SYSTEM]
SYSTEM PROBLEM NOTIFICATION IS DISPLAYED [PARKING ASSIST SYSTEM]
SM2336302
id0903n5070400
Outline
|
Description
|
• System problem notification is displayed.
|
|
Possible cause
|
• Scratches or dirt on area around ultrasonic sensor
• Ultrasonic sensor malfunction
• Parking assist unit (ultrasonic)
|
Diagnostic Procedure
|
Step |
Inspection |
Results |
Action |
|---|---|---|---|
|
1
|
VERIFY ALL SYSTEM DTCs
• Perform the DTC inspection. (See DTC INSPECTION.)
• Are any DTCs displayed?
|
Yes
|
Repair the malfunctioning location according to the applicable DTC troubleshooting.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY ULTRASONIC SENSOR CONDITION
• Visually verify the applicable part.
• Is the part normal?
|
Yes
|
Go to the next step.
|
|
No
|
Repair or replace the malfunctioning location and perform the repair completion verification.
|
||
|
3
|
INSPECT ULTRASONIC SENSOR FOR MALFUNCTION
• Inspect the applicable part. (See FRONT ULTRASONIC SENSOR INSPECTION.) (See REAR ULTRASONIC SENSOR INSPECTION.)
• Is the part normal?
|
Yes
|
Go to the next step.
|
|
No
|
Repair or replace the malfunctioning location and perform the repair completion verification.
|
||
|
Repair completion verification
|
VERIFY THAT VEHICLE IS REPAIRED
• Install/connect the part removed/disconnected during the troubleshooting procedure.
• Has the malfunction symptom been eliminated?
|
Yes
|
Complete the symptom troubleshooting. (Explain contents of repair to customer)
|
|
No
|
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.
If the CAN communication is normal, perform the diagnosis from Step 1.
• If the malfunction is not resolved, replace the parking assist unit (ultrasonic). (See PARKING ASSIST UNIT (ULTRASONIC) REMOVAL/INSTALLATION.)
|