id0917008030x1

Front Floor Covering

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the following parts:

(1)Joint cover (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [(US)].)

(2)Accelerator pedal (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].) (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))].)

(3)Front seat belt lower anchor (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(4)Front seat (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(5)Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(6)Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(7)Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(8)B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

(9)B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(10)Shift lever knob (MTX) (See SHIFT LEVER REMOVAL/INSTALLATION [C66M-R].)

(11)Selector lever knob (ATX) (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)

(12)Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(13)Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(14)Cup holder (See CUP HOLDER REMOVAL/INSTALLATION.)

(15)Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(16)Rear console (See REAR CONSOLE REMOVAL/INSTALLATION [(US)].)

(17)Rear console bracket No.1 (See REAR CONSOLE REMOVAL/INSTALLATION [(US)].)

(18)Shift lever component (MTX) (See SHIFT LEVER REMOVAL/INSTALLATION [C66M-R].)

(19)Selector lever component (ATX) (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)

(20)SAS control module (See SAS CONTROL MODULE REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM – MEXICO SPEC.].) (See SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM – US/CANADA SPEC.].)

(21)360° view monitor control module (with 360° view monitor system) (See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION [(US)].)

(22)Parking assist unit (with parking assist system) (See PARKING ASSIST UNIT (OPTICAL) REMOVAL/INSTALLATION [(US)].)

(23)Audio amplifier (See AUDIO AMPLIFIER REMOVAL/INSTALLATION.)

(24)Rear heat duct No.1 (See REAR HEAT DUCT REMOVAL/INSTALLATION [(US)].)

(25)Dashboard bracket (See DASHBOARD REMOVAL [(US)].) (See DASHBOARD INSTALLATION [(US)].)

3.Disconnect the connectors and remove the wiring harness clip A, B.

am3zzw00030494

4.Remove the nuts.

am3zzw00027693

5.Remove the rear console bracket No.2.

6.Remove the rear console bracket No.3.

7.Remove the wiring harness clips shown in the figure.

am3zzw00018890

8.Remove the fasteners.

9.Take the out from the door opening.

10.Install in the reverse order of removal. (See Front Floor Covering Installation Note.)

11.Perform the 360° view monitor system aiming. (with 360° view monitor system) (See 360°VIEW MONITOR SYSTEM AIMING.)

Rear Floor Covering

1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the following parts:

(1)Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2)Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(3)Front seat belt lower anchor (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(4)Front seat (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(5)B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

(6)B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(7)Shift lever knob (MTX) (See SHIFT LEVER REMOVAL/INSTALLATION [C66M-R].)

(8)Selector lever knob (ATX) (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)

(9)Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(10)Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(11)Cup holder (See CUP HOLDER REMOVAL/INSTALLATION.)

(12)Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(13)Rear console (See REAR CONSOLE REMOVAL/INSTALLATION [(US)].)

(14)360° view monitor control module (with 360° view monitor system) (See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION [(US)].)

(15)Parking assist unit (with parking assist system) (See PARKING ASSIST UNIT (OPTICAL) REMOVAL/INSTALLATION [(US)].)

(16)Audio amplifier (See AUDIO AMPLIFIER REMOVAL/INSTALLATION.)

(17)Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

3.Remove the nuts.

am3zzw00027694

4.Remove the rear console bracket No.4.

5.Remove the rear console bracket No.5.

6.Remove the fasteners.

am3zzw00021866

7.Take the out from the door opening.

8.Install in the reverse order of removal.

9.Perform the 360° view monitor system aiming. (with 360° view monitor system) (See 360°VIEW MONITOR SYSTEM AIMING.)

Front Floor Covering Installation Note

1. Before assembling the floor covering, verify that the heel cushion does not interfere with the retainer.

am3zzw00027695

Caution

• When installing the front floor covering, the front floor covering may press the A/C unit drain hose and deform it. When installing the front floor covering, align the front floor covering to the body to prevent deforming the A/C unit drain hose.

2. Before installing the side wall, verify that the A/C unit drain hose is not deformed.

am3zzw00021867