id091700801900

Replacement part

1.Partially peel back the seaming welt.

am3zzw00021822

2.Grasp the shaded areas shown in the figure, and pull the A-pillar trim in the direction of the arrow while detaching clips A and clip B.

am3zzw00021823

3.Cut the lead wire connecting clip B and the grommet using a nipper.

am3zzw00021824

4.Pull the A-pillar trim in the direction of the arrow and remove the A-pillar trim while detaching the guides.

am3zzw00021825

5.Insert a tape-wrapped flathead screwdriver into the position shown in the figure, move it in the direction of the arrow, and then detach the hook.

am3zzw00021826

6.Move the hook in the direction of arrow (1) shown in the figure using a tape-wrapped flathead screwdriver and detach it from the front pillar inner panel.

am3zzw00021827

7.Remove the grommet in the direction of arrow (2) shown in the figure.

8.When installing the A-pillar trim, install new clip B and grommet to the A-pillar trim in advance.

9.Install in the reverse order of removal.