id0140u0801100

Note

• Because the BARO sensor is integrated in the PCM, replacing the BARO sensor includes replacement of the PCM.

1.Connect the M-MDS to the DLC‐2.

2.Switch the ignition ON (engine off).

3.Measure the barometric pressure using a barometer.

4.Verify that the measured barometric pressure and the actually measured barometric pressure (PID: BARO) input from the BARO sensor match. (See PID/DATA MONITOR INSPECTION.)

• If the measured barometric pressure and the actually measured barometric pressure do not match, replace the PCM. (See PCM REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].)