TCM CONFIGURATION [ET6A-EL]
TCM CONFIGURATION [ET6A-EL]
SM2856897
id0517n1119200
-
Note
-
• The TCM is built into the control valve body.
1.Verify TCM configuration implementation necessity for replacement parts.
|
Replacement part |
Configuration necessity |
|---|---|
|
Control valve body replacement
|
Necessary
|
|
Oil pressure switch replacement
|
Unnecessary
|
|
Automatic transaxle replacement
|
Necessary
|
|
ON/OFF solenoid replacement
|
Unnecessary
|
|
Coupler component replacement
|
Unnecessary
|
2.Connect the M-MDS to the DLC-2.
3.Switch the ignition ON (engine off or on).
4.Perform vehicle identification.
5.Select [Configuration] using the M-MDS.
6.Select [TCM].
7.Perform manual configuration following the instructions on the screen.
8.Switch the ignition off.
9.Switch the ignition ON (engine off or on) to complete the control valve body automatic configuration.
10.Clear the DTC. (See CLEARING DTC.)