AUTO HOLD SWITCH INSPECTION
AUTO HOLD SWITCH INSPECTION
SM2335205
id041500802800
-
Note
-
• The AUTOHOLD switch is integrated into the electric parking brake switch.• For the AUTOHOLD switch removal/installation, refer to the electric parking brake removal/installation. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)
Continuity Inspection
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)
3.Verify that the continuity is as indicated in the table.
|
|
-
• If not as indicated in the table, replace the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)
Illumination Light Inspection
-
Note
-
• The illumination light is built into the AUTOHOLD switch. If there is any malfunction, replace the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)
3.Apply battery positive voltage to electric parking brake switch terminal K, and connect terminal B to ground.
|
4.Verify that the illumination light turns on.
|
-
• If there is any malfunction, replace the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)
Indicator Light Inspection
-
Note
-
• The indicator light is built into the AUTOHOLD switch. If there is any malfunction, replace the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)
3.Apply battery positive voltage to electric parking brake switch terminal L, and connect terminal G to ground.
|
4.Verify that the indicator light turns on.
|
-
• If there is any malfunction, replace the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION.)