Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DOOR ADJUSTMENT

DOOR ADJUSTMENT

SM2336352

id091100521100

1.Measure the gap and height difference between the door and the body.
am3zzw00029695
Standard clearance (4SD)
a: 2.3—4.0 mm {0.10—0.15 in}
b: –1.1—0.6 mm {–0.04—0.02 in}
c: 2.5—4.3 mm {0.10—0.16 in}
d: –0.8—1.2 mm {–0.03—0.04 in}
e: 2.0—4.0 mm {0.08—0.15 in}
f: –1.0—1.0 mm {–0.039—0.039 in}
Standard clearance (5HB)
a: 2.3—4.0 mm {0.10—0.15 in}
b: –1.1—0.6 mm {–0.04—0.02 in}
c: 2.5—4.3 mm {0.10—0.16 in}
d: –0.8—1.2 mm {–0.03—0.04 in}
e: 2.0—4.0 mm {0.08—0.15 in}
f: –1.0—1.0 mm {–0.039—0.039 in}
• If the measured value exceeds the standard clearance, adjust the door using the following procedure:
1. Loosen the door hinge installation bolts and adjust the door.
2. Tighten the door hinge installation bolts. (See FRONT DOOR REMOVAL/INSTALLATION.) (See REAR DOOR REMOVAL/INSTALLATION.)
3. If the door does not open/close smoothly, adjust it by loosening the door lock striker installation screw. (See DOOR LOCK STRIKER ADJUSTMENT.)
4. Spray or pour water on the door and surrounding area using a hose or high pressure water pressure car wash and verify that there is no water leakage.
5. If the front door is adjusted, perform the 360° view monitor system aiming. (with 360° view monitor system) (See 360°VIEW MONITOR SYSTEM AIMING.)