REAR COMBINATION LIGHT INSPECTION
REAR COMBINATION LIGHT INSPECTION
SM2336609
id091800821000
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the rear combination light. (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)
3.Apply battery positive voltage and connect the ground to the rear combination light terminals as indicated in the table below and verify that each light turns on normally.
am3zzw00027217
|
|
B+ Terminal |
Ground Terminal |
Condition |
||
|---|---|---|---|---|
|
Rear turn light |
Brake light |
Tail light |
||
|
A
|
F
|
turns ON
|
turns OFF
|
turns OFF
|
|
B
|
F
|
turns OFF
|
turns ON
|
turns OFF
|
|
C
|
F
|
turns OFF
|
turns OFF
|
turns ON
|
-
• If each light does not turn on normally, replace the rear combination light. (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)