id092000469100

Note

The integrity of the USB port/SD card slot hub cannot be determined from a single part. When inspecting the USB port/SD card slot hub, perform the following procedure.

1.Connect the M-MDS to the DLC-2.

2.Perform the DTC inspection for the connectivity master unit (CMU) and verify if any DTCs related to the USB PORT/SD CARD SLOT HUB is detected. (See DTC INSPECTION.)

• If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting.(Refer to the [DTC TABLE [CONNECTIVITY MASTER UNIT (CMU)]] in the workshop manual)