FRONT ULTRASONIC SENSOR SHORT-CORD REMOVAL/INSTALLATION
FRONT ULTRASONIC SENSOR SHORT-CORD REMOVAL/INSTALLATION
SM2336704
id092200031000
Replacement part
|
Tape
Quantity: 4
Location of use: Front ultrasonic sensor short-cord
|
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the upper face. (See UPPER FACE REMOVAL/INSTALLATION [(US)].)
3.Remove the front bumper.(See FRONT BUMPER REMOVAL/INSTALLATION [(US)].)
4.Remove the tapes.
am3zzw00024640
|
5.Disconnect the connectors.
6.Remove the wiring harness clips.
7.Remove the front ultrasonic sensor short-cord.
8.Install the reverse order of removal.
9.Perform the 360° view monitor system aiming. (with 360° view monitor system) (See 360°VIEW MONITOR SYSTEM AIMING.)
10.Perform the front radar sensor aiming adjustment. (with front radar sensor) (See FRONT RADAR SENSOR AIMING.)
11.Perform the front side radar sensor aiming adjustment. (with front side radar sensor) (See FRONT SIDE/REAR SIDE RADAR SENSOR AIMING.)