FRONT RADAR SENSOR INSPECTION
FRONT RADAR SENSOR INSPECTION
SM2337188
id152000014700
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the front radar sensor. (See FRONT RADAR SENSOR REMOVAL/INSTALLATION.)
3.Connect the front radar sensor connector.
4.Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
5.Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).
-
• If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.
-
― If the system does not operate normally even though the inspection items are normal, replace the front radar sensor. (See FRONT RADAR SENSOR REMOVAL/INSTALLATION.)
-
Terminal Voltage Table (Reference)
am3zzw00027434
|
|
Terminal |
Signal name |
Connected to |
Measurement conditions |
Voltage (V) |
Inspection item(s) |
|
|---|---|---|---|---|---|---|
|
A
|
Ground
|
Body ground
|
Under any condition
|
1.0 or less
|
Related wiring harness
|
|
|
B
|
—
|
—
|
—
|
—
|
—
|
|
|
C
|
CAN_L
|
CAN system related module
|
Because this terminal is for communication, determination using terminal voltage inspection is not possible.
|
|||
|
D
|
—
|
—
|
—
|
—
|
—
|
|
|
E
|
CAN_H
|
CAN system related module
|
Because this terminal is for communication, determination using terminal voltage inspection is not possible.
|
|||
|
F
|
—
|
—
|
—
|
—
|
—
|
|
|
G
|
—
|
—
|
—
|
—
|
—
|
|
|
H
|
Power position (IG1)
|
IG1 relay
|
Ignition switched ON (engine off or on)
|
V B
|
• IG1 relay
• Related wiring harness
|
|
|
Ignition switched off or ACC
|
1.0 or less
|
|||||