KNOCK SENSOR (KS) REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]
KNOCK SENSOR (KS) REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))]
SM2565869
id0140u0802900
1.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)
2.Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))].)
3.Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))].)
4.Disconnect the KS connector.
5.Remove the KS. (See KS Installation Note.)
am3zzw00024355
|
6.Install in the reverse order of removal.
KS Installation Note
• Verify that there is no foreign matter caught between the KS unit and cylinder block.
• The direction of the KS connector is within the angle range shown in the figure.
ac5uuw00009146
|
