LOW MAXIMUM SPEED AND POOR ACCELERATION [ET6A-EL (US)]
LOW MAXIMUM SPEED AND POOR ACCELERATION [ET6A-EL (US)]
SM2566132
id0503n21009n5
|
Troubleshooting item |
Low maximum speed and poor acceleration |
|---|---|
|
Description
|
• Vehicle acceleration is poor at start.
• Delayed acceleration when accelerator pedal is depressed while driving.
|
|
Possible cause
|
• Engine control system malfunction
• Signal malfunction
|
|
System wiring diagram
|
• Not applicable
|
|
Connector diagram
|
• Not applicable
|
Diagnostic procedure
|
Step |
Inspection |
Results |
Action |
|---|---|---|---|
|
1
|
INSPECT ENGINE CONTROL SYSTEM FOR MALFUNCTION
• Perform the symptom troubleshooting “LACK/LOSS OF POWER-ACCELERATION/CRUISE”. (See LACK/LOSS OF POWER-ACCELERATION/CRUISE [SKYACTIV-G (US)].)
• Is there any malfunction?
|
Yes
|
Repair or replace any malfunctioning parts according to the inspection result.
|
|
No
|
Go to the next step.
|
||
|
2
|
INSPECT SIGNAL PARTS FOR MALFUNCTION
• Inspect the value at the following PCM PIDs using the M-MDS. (See PID/DATA MONITOR INSPECTION.)
• Is there any malfunction? (See PID/DATA MONITOR TABLE [PCM (SKYACTIV-G (US))].)
|
Yes
|
Repair or replace any malfunctioning parts according to the inspection result.
|
|
No
|
Explain to the customer that the vehicle is not malfunctioning and they should keep an eye on it.
|