EXCESSIVE SHIFT SHOCK IS FELT WHEN UPSHIFTING AND DOWNSHIFTING [EV6A-EL, EV6AX-EL]
EXCESSIVE SHIFT SHOCK IS FELT WHEN UPSHIFTING AND DOWNSHIFTING [EV6A-EL, EV6AX-EL]
SM2566164
id0503n9102100
|
Troubleshooting item |
Excessive shift shock is felt when upshifting and downshifting |
|---|---|
|
Description
|
• Excessive shift shock is felt when depressing accelerator pedal to accelerate at upshifting.
• During cruising, excessive shift shock is felt when depressing accelerator pedal at downshifting.
|
|
Possible cause
|
1. Insufficient TCM learning
2. Signal malfunction
3. Poor installation or worn of engine mount, suspension
4. Engine control system malfunction
|
|
System wiring diagram
|
• Not applicable
|
|
Connector diagram
|
• Not applicable
|
Diagnostic procedure
-
Note
-
• If a DTC is stored in the PCM, the malfunction may be resolved by repairing the malfunctioning location.
|
Step |
Inspection |
Results |
Action |
|---|---|---|---|
|
1
|
VERIFY MALFUNCTION SYMPTOM
• Is the malfunction symptom (shift shock/shifting time) at the same level compared to a vehicle of the same model (EV6A-EL, EV6AX-EL vehicles)?
|
Yes
|
Symptom troubleshooting is completed.
|
|
No
|
Go to the next step.
|
||
|
2
|
PERFORM INITIAL LEARNING
• Perform the initial learning. (See INITIAL LEARNING [EV6A-EL, EV6AX-EL].)
• Does the symptom disappear?
|
Yes
|
Symptom troubleshooting is completed.
|
|
No
|
Go to the next step.
|
||
|
3
|
PERFORM ON-BOARD DIAGNOSTIC TO VERIFY HYDRAULIC PRESSURE SWITCH OPERATION PRESSURE
• Is the operation pressure normal?
|
Yes
|
Go to the next step.
|
|
No
|
Replace the control valve body.
|
||
|
4
|
INSPECT SIGNAL PARTS FOR MALFUNCTION
• Inspect the value at the following PCM PID using the M-MDS. (See PID/DATA MONITOR INSPECTION.)
• Is there any malfunction? (See PID/DATA MONITOR TABLE [PCM (SKYACTIV-G (US))].)
|
Yes
|
Repair or replace any malfunctioning parts according to the inspection result.
|
|
No
|
Go to the next step.
|
||
|
5
|
INSPECT ENGINE MOUNT/SUSPENSION FOR POOR TIGHTENING
• Is there any malfunction?
|
Yes
|
Repair or replace any malfunctioning parts according to the inspection result.
|
|
No
|
Symptom troubleshooting is completed.
|