2016 – MX-5 – Transmission/Transaxle

M POSITION SWITCH INSPECTION [SJ6A-EL]

Continuity Inspection

NOTE:

• The M position switch is built into the selector lever component.

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Selector lever knob (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

b. Shift panel component (See SHIFT PANEL REMOVAL/INSTALLATION.)

3. Disconnect the selector lever component connector.

4. Verify that the continuity between selector lever component terminals E and H.

• If not as verified, replace the selector lever component. (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

M position switch specification

< Previous Next >