Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

FRONT CONSOLE REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Body and Accessories

FRONT CONSOLE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

b. Shift lever knob (MT)

c. Shift panel component (See SHIFT PANEL REMOVAL/INSTALLATION.)

d. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)

e. Parking brake lever boot panel (See PARKING BRAKE LEVER BOOT PANEL REMOVAL/INSTALLATION.)

f. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)

g. Front console panel (See FRONT CONSOLE PANEL REMOVAL/INSTALLATION.)

3. Move the front console component in the direction of the arrow shown in the figure and detach the clip from the dashboard.

4. Disconnect the auxiliary jack/USB port connector. (without center display)

5. Disconnect the auxiliary jack/USB port/SD card slot hub connector. (with center display)

6. Disconnect the indicator unit connector.

7. Remove the front console component.

8. When replacing the front console, remove the following parts:

a. Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

b. Auxiliary jack/USB port (without center display) (See AUXILIARY JACK/USB PORT REMOVAL/INSTALLATION.)

c. Auxiliary jack/USB port/SD card slot hub (with center display) (See AUXILIARY JACK/USB PORT/SD CARD SLOT HUB REMOVAL/INSTALLATION.)

d. Indicator unit (See INDICATOR UNIT REMOVAL/INSTALLATION.)

9. Install in the reverse order of removal.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.