Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

REAR CONSOLE REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Body and Accessories

REAR CONSOLE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

b. Shift lever knob (MT)

c. Shift panel component (See SHIFT PANEL REMOVAL/INSTALLATION.)

d. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)

e. Parking brake lever boot panel (See PARKING BRAKE LEVER BOOT PANEL REMOVAL/INSTALLATION.)

3. Remove the screws.

4. Remove the wiring harness clip.

5. Hold the shaded areas shown in the figure, lift up the rear console in the order of arrow (1) and (2), and detach the clips.

6. Install in the reverse order of removal.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.