id092000822600

1.Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

2.Remove the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [(US)].)

3.Verify that the resistance and continuity between the steering switch terminals is as indicated in the table.

am3zzw00032842

• If not as indicated in the table, replace the steering switch. (See STEERING SWITCH REMOVAL/INSTALLATION.)

am3zzw00027471

am3zzw00027472

am3zzw00027473

4.Apply battery positive voltage to steering switch terminal 1N, and connect terminal 3B to ground.

am3zzw00032843

5.Verify that the LED illuminates.

• If the LED does not illuminate, replace the steering switch. (See STEERING SWITCH REMOVAL/INSTALLATION.)