FUEL-FILLER LID OPENER CABLE REMOVAL/INSTALLATION [(US)]

id0914005108x1

Replacement Part

Band

Quantity: 2

Location of use: Fuel-filler lid opener cable

4SD

1.Open the fuel-filler lid.

Note

• If the fuel-filler lid cannot be opened due to a discharged battery or malfunctions in the electrical system, open the fuel-filler lid referring to the [FUEL-FILLER LID LOCK ACTUATOR MANUAL RELEASE PROCEDURE]. (See FUEL-FILLER LID LOCK ACTUATOR MANUAL RELEASE PROCEDURE [(US)].)

2.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

3.Remove the following parts:

(1)Rear tire (LH) (See WHEEL AND TIRE SPECIFICATION [(US)].)

(2)Rear mudguard (LH) (See MUDGUARD REMOVAL/INSTALLATION.)

(3)Fuel-filler pipe (See FUEL-FILLER PIPE REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].) (See FUEL-FILLER PIPE REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))].)

(4)Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)

(5)Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION [(US)].)

(6)Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

4.Partially peel the trunk side trim (LH). (See TRUNK SIDE TRIM REMOVAL/INSTALLATION [(US)].)

5.Remove the trunk side insulator (LH). (See TRUNK SIDE INSULATOR REMOVAL/INSTALLATION.)

6.Remove the fuel-filler lid box. (See FUEL-FILLER LID LOCK ACTUATOR REMOVAL/INSTALLATION [(US)].)

7.Cut the bands.

am3zzw00028047

8.Disconnect the fuel-filler lid opener cable.

9.Install in the reverse order of removal.

5HB

1.Open the fuel-filler lid.

Note

• If the fuel-filler lid cannot be opened due to a discharged battery or malfunctions in the electrical system, open the fuel-filler lid referring to the [FUEL-FILLER LID LOCK ACTUATOR MANUAL RELEASE PROCEDURE]. (See FUEL-FILLER LID LOCK ACTUATOR MANUAL RELEASE PROCEDURE [(US)].)

2.Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)].)

3.Remove the following parts:

(1)Rear tire (LH) (See WHEEL AND TIRE SPECIFICATION [(US)].)

(2)Rear mudguard (LH) (See MUDGUARD REMOVAL/INSTALLATION.)

(3)Fuel-filler pipe (See FUEL-FILLER PIPE REMOVAL/INSTALLATION [SKYACTIV-G (WITHOUT CYLINDER DEACTIVATION (US))].) (See FUEL-FILLER PIPE REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (US))].)

(4)Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)

(5)Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)

(6)Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION [(US)].)

(7)Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(8)Trunk side upper trim (LH) (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

4.Partially peel the trunk side trim (LH). (See TRUNK SIDE TRIM REMOVAL/INSTALLATION [(US)].)

5.Remove the trunk side insulator (LH). (See TRUNK SIDE INSULATOR REMOVAL/INSTALLATION.)