SWITCH/DIAL OPERATION DOES NOT RESPOND [MANUAL AIR CONDITIONER]
SWITCH/DIAL OPERATION DOES NOT RESPOND [MANUAL AIR CONDITIONER]
SM2335683
id0703c2005300
|
Troubleshooting item |
Switch/dial operation does not respond |
|
|---|---|---|
|
Description
|
• Specific switch/dial operation of climate control unit does not respond
|
|
|
Possible cause
|
• Climate control unit malfunction
• Rear window defogger switch
• Airflow volume control switch malfunction
• A/C switch system malfunction
• Seat warmer control unit malfunction
• Steering warmer control unit malfunction
|
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY MALFUNCTION DURING EACH SWITCH/DIAL OPERATION
• Do the related parts operate according to the switch/dial operation of the climate control unit?
|
Yes
|
Perform the repair completion verification.
|
|
No
|
If specific switch/dial operation does not respond
• Go to the next step.
If all switch/dial operations do not respond
• Go to the following malfunction symptom item. (See ALL SWITCH/DIAL OPERATION DOES NOT RESPOND [MANUAL AIR CONDITIONER].)
|
||
|
2
|
VERIFY MALFUNCTIONING SWITCH/DIAL
• Is any one of the following climate control unit switch the one which does not respond to being operated?
|
Yes
|
Go to the applicable inspection.
― Steering warmer switch (See HEATED STEERING WHEEL CONTROL UNIT INSPECTION.)
― Seat warmer switch (See POSITION MEMORY CONTROL MODULE REMOVAL/INSTALLATION [(US)].)
|
|
No
|
Go to the next step.
|
||
|
3
|
PERFORM DASH-ELECTRICAL SUPPLY UNIT DTC INSPECTION
• Perform the dash-electrical supply unit DTC inspection using the M-MDS. (See DTC INSPECTION.)
• Are any DTCs displayed?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY MALFUNCTIONING SWITCH/DIAL
• Is the switch which does not respond to being operated the rear window defogger switch?
|
Yes
|
Verify the body control module (BCM) DTCs.
If DTC is displayed:
• Repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [BODY CONTROL MODULE (BCM) (US)].)
If DTC is not displayed:
• Replace the climate control unit, then perform the repair completion verification. (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER (US)].)
|
|
No
|
Go to the next step.
|
||
|
5
|
VERIFY MALFUNCTIONING SWITCH/DIAL
• Is any one of the following climate control unit switch/dials the one which does not respond to being operated?
|
Yes
|
Replace the climate control unit, then perform the repair completion verification.
|
|
No
|
Go to the next step.
|
||
|
6
|
VERIFY MALFUNCTION DURING AIRFLOW VOLUME CONTROL SWITCH OPERATION
• Is the switch which does not respond to being operated the climate control unit airflow volume control switch?
|
Yes
|
Go to the next step.
|
|
No
|
Go to Step 8.
|
||
|
7
|
DETERMINE IF MALFUNCTION IS CAUSED BY FRONT BLOWER MOTOR CIRCUIT MALFUNCTION OR FRONT CLIMATE CONTROL UNIT MALFUNCTION
• Is the airflow volume setting displayed normally in the display panel after operating the climate control unit airflow volume control switch?
|
Yes
|
Go to the following malfunction symptom item.
|
|
No
|
Replace the climate control unit, then perform the repair completion verification.
|
||
|
8
|
VERIFY MALFUNCTION DURING A/C SWITCH OPERATION
• Is the switch which does not respond to being operated the climate control unit A/C switch?
|
Yes
|
Go to the next step.
|
|
No
|
Perform the repair completion verification.
|
||
|
9
|
DETERMINE IF MALFUNCTION IS CAUSED BY A/C OPERATION CIRCUIT MALFUNCTION OR FRONT CLIMATE CONTROL UNIT MALFUNCTION
• Is [A/C] displayed in the display panel after operating the climate control unit A/C switch?
|
Yes
|
Go to the following malfunction symptom item.
|
|
No
|
Go to the next step.
|
||
|
10
|
VERIFY AMBIENT TEMPERATURE
• Is the ambient temperature -5 °C or less?
|
Yes
|
Normal (A/C does not turn on when ambient temperature is -5 °C or less to protect A/C compressor)
|
|
No
|
Replace the climate control unit, then perform the repair completion verification.
|
||
|
Repair completion verification
|
VERIFY THAT MALFUNCTION SYMPTOM DOES NOT RECUR AFTER REPAIR
• Do the related parts operate according to the switch/dial operation of the climate control unit?
|
Yes
|
Troubleshooting completed.
Explain repairs to customer.
|
|
No
|
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.
If the CAN communication is normal, perform the diagnosis from Step 1.
|
||