POWER WINDOW SYSTEM DOES NOT OPERATE DURING IG OFF TIMER [POWER WINDOW SYSTEM]
POWER WINDOW SYSTEM DOES NOT OPERATE DURING IG OFF TIMER [POWER WINDOW SYSTEM]
SM2566392
id0903a0072900
Outline
|
Description
|
• Power window system does not operate during IG OFF timer operation.
|
|
Possible cause
|
• Front door latch and lock actuator malfunction
• Rear door latch and lock actuator malfunction
|
Diagnostic Procedure
|
Step |
Inspection |
Results |
Action |
|---|---|---|---|
|
1
|
VERIFY ALL SYSTEM DTCs
• Perform the DTC inspection. (See DTC INSPECTION.)
• Are any DTCs displayed?
|
Yes
|
Repair the malfunctioning location according to the applicable DTC troubleshooting.
|
|
No
|
Go to the next step.
|
||
|
2
|
INSPECT DOOR LATCH AND LOCK ACTUATOR FOR MALFUNCTION
• Inspect the applicable part. (See FRONT DOOR LATCH AND LOCK ACTUATOR INSPECTION [(US)].) (See REAR DOOR LATCH AND LOCK ACTUATOR INSPECTION [(US)].)
• Is the part normal?
|
Yes
|
Go to the next step.
|
|
No
|
Repair or replace the malfunctioning location and perform the repair completion verification.
|
||
|
Repair completion verification
|
VERIFY THAT VEHICLE IS REPAIRED
• Install/connect the part removed/disconnected during the troubleshooting procedure.
• Has the malfunction symptom been eliminated?
|
Yes
|
Complete the symptom troubleshooting. (Explain contents of repair to customer)
|
|
No
|
Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.
If the CAN communication is normal, perform the diagnosis from Step 1.
|